Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)V

v1605

@ v1605 @lemmy.world

Posts
60
Comments
145
Joined
3 yr. ago

  • TV Choice

    Jump

  • If you're going with a scaler, it's definitely worth it to invest in better cables (even though the n64 uses the same connector as snes, it does not support rgb without mods)

    https://insurrectionindustries.com/product/nintendo-s-video/

    https://insurrectionindustries.com/product/sony-playstation-rgb-scart-cable/

    https://insurrectionindustries.com/product/super-nintendo-entertainment-system-rgb-scart-cable/

    https://www.amazon.com/HD-Retrovision-Premium-YPbPr-Component/dp/B07TL6L7MY

    Some helpful videos: https://youtu.be/VYkWtkvhS9c https://youtu.be/fi7csYj00BU

    Also if you're not too attached to using original hardware, you might want to take a look at getting a mister to play ps1 and before systems (the new super station is a good choice https://retroremake.co/pages/superstation%E1%B5%92%E2%81%BF%E1%B5%89 )

  • TV Choice

    Jump

  • I would say "probably". A lot of TVs don't have great scaling from 240p, 480p, and 480i content so a dedicated scaler will look better in most cases. Also be aware that the Ossc Pro does need an additional add-on for S-video (which for an unmodified N64 is its best output).

  • TV Choice

    Jump

  • Upscaler is the correct term. If you are looking for the best possible image to recreate a CRT, the retrotink 4k is the best option. It will require a good TV though, something like a LG C4. The reason being to get good looking scanlines, you need 4k, 120hz, and vrr.

    The retrotink 4k also supports all your inputs (Xbox 360 HDMI, n64 s-video, snes rgb, PS2 component, etc...).

    Here is a good video why the 120hz is important for recreating the crt feel (a little old and retrotink 4k has only gotten better since then) https://youtu.be/3ZmPkozY6Cg

    You other options for a good scaler are the Morph 4K and the ossc pro. This spreadsheet has a good in depth comparison between all three https://docs.google.com/spreadsheets/d/16FBPBD3A1vN_khznTUO1bGrb3LxTIQXfwWfusPeNSsw/edit?usp=drivesdk

  • Console(s) to TV

    Jump

  • I go through different switchers to various inputs of the retrotink4k. I avoid composite to keep it simple and get a better picture.

    • Dreamcast -> VGA
    • PS2 -> Component Switcher
    • N64 -> Component Switcher
    • GC -> HDMI GcVideo adapter (forcing 480p through swiss) -> HDMI Switch
    • Nintendo Switch -> HDMI Switch

  • GBA Not Charging Fixed

    Jump

  • A quick way to test EM8 is to plug in the charger and check for voltage going to F1. Mine EM8 did have continuity through it, F1 was 0v so I figured it just became a little loose after removing the charging port.

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    GBA Not Charging Fixed

  • GBA SP Low Volume Fix

    Jump

  • No problem, we all have to start somewhere (I'm also more of a software guy). A tip for trace repair, get a cheap D2 grinding/engraving pen off Alliexpress. It's a lot easier to use one of these than using a knife to scratch off the solder mask.

  • GBA SP Low Volume Fix

    Jump

  • So in the case I looked at board scans from Natalie the Nerd to get a clear idea where each of the pads and traces went. After confirming continuity on those points and testing my reconnected traces, I knew the volume was still too low. I followed the traces via the board scan testing against my board with a multimeter on continuity mode, and eventually figured out there was a broken trace underneath the cartridge slot.

    I actually just added a new charging port and it's not charging (replaced a fuse, still nothing). I'll probably have to do the process again to track this down.

  • GBA SP Low Volume Fix

    Jump

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    GBA SP Low Volume Fix

  • Should I get OSSC Pro or RetroTINK-4X CE?

    Jump

  • Wobbling Pixels put together a good comparison between CE, Morph, and OSSC Pro. According to that sheet dealing with sync, the OSSC has issues with switching resolutions if the aspect ratio is set to 1:1 instead of something like 4:3

  • Ninten-drawers and Steel N64 Bowls Coming Back In Stock

    Jump
  • Console Repair @lemmy.world
    v1605 @lemmy.world

    GBA Followup, Successful Transplant

  • Ninten-drawers and Steel N64 Bowls Coming Back In Stock

    Jump

  • Ninten-drawer is a modern sliding replacement tray for the NES. It is more reliable than the cheap replacement 72 pin connector and doesn't have a death grip on the cartridge. https://youtu.be/4lpCNMxGW3s

    N64 controller stick modules work by spinning rotary encoders as the stick moves. The stick is and the bowl (typo in title haha) that keeps it in place are made of plastic. Overtime, both the stick and the bowl wear down and get loose. Using a steal bowl with a new stick keeps the original feel with much less grinding.

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Ninten-drawers and Steel N64 Bowls Coming Back In Stock

    bsky.app /profile/rockergaming.bsky.social/post/3lktg2lq4z22l

  • Analogue’s 4K Nintendo 64 retro console has been delayed, again

    Jump

  • I get this is supposed to be a joke but why is it funny?

  • Analogue’s 4K Nintendo 64 retro console has been delayed, again

    Jump

  • I like to take one step further and use a white pencil eraser followed by IPA. Helps get more of the dirt and oxidation off.

  • This is why you never leave batteries in your systems

    Jump

  • Thanks. Hot air in this case. The process I use for this is to add fresh leaded solder, then some extra flux. After that, just keep moving around the hot air nozzle.

  • This is why you never leave batteries in your systems

    Jump

  • Here is the cpu removed, luckily only one pin was partially corroded.

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    This is why you never leave batteries in your systems

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    PS5 Optical Drive Connector Repair

  • Taki Udon Announces SS One FPGA Console For Your PS1 Games & Other Retro Systems

    Jump

  • It's doubtful any other cores will be present on the 3d, they have posted that it will not support openFPGA.

  • Retrotink 4k CE Announced and Mini Restock

    Jump

  • Or someone looking to buy their first. The user experience (menu wise) on the 4k line is so much nicer than the 5x in my opinion.

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Retrotink 4k CE Announced and Mini Restock

    www.retrotink.com /post/holiday-2024-special-introducing-the-retrotink-4k-ce-and-more
  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    MiSTerFPGA With Zaparoo Floppy Drive

  • homeassistant @lemmy.world
    v1605 @lemmy.world

    Wifi Serial Bridge Example

    github.com /v1605/python-wifi-serial-bridge/tree/main

  • Trogg Tech N64 Shell Finally Arrived

    Jump

  • Tech support brain completely missed that one lol

  • Trogg Tech N64 Shell Finally Arrived

    Jump

  • The post definitely has a photo.

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Trogg Tech N64 Shell Finally Arrived

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Load Games On Your Mister Via Floppy Disk

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    GBC Chip Swap, Good Enough

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Happy National Video Game Day Everyone!

    nationaltoday.com /national-video-game-day/
  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Lastest Build, DMGC

    lemmy.world /post/19484892
  • Console Repair @lemmy.world
    v1605 @lemmy.world

    Series X Replacement Hdmi- Funtional

  • Console Repair @lemmy.world
    v1605 @lemmy.world

    Series X Ceramic Cap Value

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Some Cartridges To Brighten Up The Desk

  • RetroGaming @lemmy.world
    v1605 @lemmy.world

    Another GameBoy Bluetooth Controller