Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)S
Posts
6
Comments
120
Joined
3 yr. ago

  • It's more dull in grams: 453.5924g

  • Currently using amazfit trex2 with gadget bridge.

    All the things I actually use work. My only peeve is that you can't silence /stop phone alarms from the watch, but I believe this is a general android thing...

  • My pebble 2 Duo arrived yesterday... It doesn't yet pair with Gadgetbridge but I imagine it will at some point.

    I've also ordered the Pebble Time 2, which I think will be a better watch for me: going back to a b/w display without touchscreen is hard. The Time2 has both colour and touchscreen....

  • After learning how long it takes to heat soak my v2.4-350, I can't imagine how long that 500x500 plate is going to take!!

  • With the exception of crap for the kids and cake toppers, everything I print is to solve a problem I/we have.

    Here are the gridfinity drawers I designed and printed for under my desk. https://www.printables.com/model/1129785-gridfinity-under-desk-drawer-system

    I'm about to start printing triple stacks of these to put better drawers into my IKEA KALLAX shelves than the ones IKEA sells.

  • Oh come on people!!

    If there was EVER a use case for repurposing a USB stick to make a Linux install USB, it would HAVE to be this one, surely?!

  • See: https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/4254

    I spent 3 months working with support, they replaced just about everything related, eventually sent me a whole new printer, and the new one had the exact same issue out of the box.

    It starts too low consistently, so filament builds up constantly till it drops and ruins the print.

    I can't print anything bigger than 20cm² without it dropping a giant blob somewhere in the print and ruining it..

    Always perfect first layer is not real, and my experience is that they are distancing themselves from the promise they made when the mk4 was announced.

  • FWIW, I've been a long time Prusa user, but I'm returning my Prusa mk4s and wouldn't buy one ever again.

  • Worth looking at https://www.halocell.energy/

    They have a solution where they overlay perovskite cells over traditional PV and can augment collection without impacting the regular PV underneath...

  • I dunno... Look a bit fancy with the ice and whatnot there.... 🕺

  • Easy there tiger.... Nothing exciting allowed, yeah?! 😎

  • I use routines and exercise "streaks".

    A 30min morning walk does wonders for my mental clarity and work drive.

    Secret for me is to get a "streak" of contiguous days ive walked, and be really focussed on not losing the streak... Gets me up, out of bed, dressed and out for my walk.

    Everything is easier after that...

  • I've learned that if it is just the top speed that is slow, it's a replacement capacitor behind the light switch.

    If all speeds are slow, it's the whole fan to be replaced.

    (We live in a warm place, and fans run 24/7 in some of our rooms, so we go through this process at least yearly for at least one of our fans)

  • Of what, a metric shit-ton?

    🤣

  • Be careful. I've heard tells / seen posts that seem to indicate there are now monitors that tap your USBC to get network, and display ads.. 🫠

  • It was Flashforge Adventurer 3, and was $600 AUD, this was all pre COVID.

  • I had a 20+ Yr old car with a key fob that had broken, so it would stay on a key ring and wouldn't stay closed.

    Wreckers wanted $700 for a new key fob case as I'd have to buy the whole second hand keyless entry system.

    A small 3d printer cost $650.

    I bought the printer, then designed and printed my own key fob case, including replacing the worn out rubber buttons with some harvested out of an old kitchen timer.

    No one was ever impressed or interested with the whole thing, so I figured this meets the criteria for inclusion here...

  • Dull Men's Club @lemmy.world

    I turned the solar panels back on today

  • Dull Men's Club @lemmy.world

    I'm making some drawers to go under my desk

  • Dull Men's Club @lemmy.world

    Mowed the lawn today..

  • Dull Men's Club @lemmy.world

    I got new glasses

  • Dull Men's Club @lemmy.world

    I've figured out why I like it in here so much...

  • Programmer Humor @lemmy.ml

    My son uses Arch... How do I know? He tells me... Constantly...