Skip Navigation

InitialsDiceBearhttps://github.com/dicebear/dicebearhttps://creativecommons.org/publicdomain/zero/1.0/„Initials” (https://github.com/dicebear/dicebear) by „DiceBear”, licensed under „CC0 1.0” (https://creativecommons.org/publicdomain/zero/1.0/)P

pm_me_your_happiness

@ pm_me_your_happiness @lemmy.one

Posts
6
Comments
39
Joined
3 yr. ago

  • The most fitting end to r/Place

    Jump

  • Nah fuck that guy

  • Built my first PC! Thanks so much for the advice.

    Jump

  • Ah hell, I knew something was off.

  • Built my first PC! Thanks so much for the advice.

    Jump

  • Built my first PC! Thanks so much for the advice.

    Jump

  • It was about $850, plus some to replace some cables. The prebuilts I saw in the same price range were a lot weaker. I also got lucky with prime day, got to upgrade a few parts for the same price.

    Here’s the thread: https://lemmy.one/post/876670

  • Built my first PC! Thanks so much for the advice.

    Jump

  • The hardest part for me honestly was trying to figure out how to get the heat sink back on the m2 after I installed the ssd lol. Took me an hour before I realized there was an extra screw.

    Also took me another hour trying to figure out how to install the motherboard in the case. I finally realized that the case had some standoffs in a baggie tucked away in the psu compartment.

    I should have taken the advice I read not to start at 9 PM lol.

  • Built my first PC! Thanks so much for the advice.

    Jump

  • Appreciate it!

  • Built my first PC! Thanks so much for the advice.

    Jump

  • Thanks. Have wanted to do it since I was a kid

  • Built my first PC! Thanks so much for the advice.

    Jump

  • Thanks!

  • Buildapc @lemmy.world
    pm_me_your_happiness @lemmy.one

    Built my first PC! Thanks so much for the advice.

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • I ended up going with the Samsung 980 Pro. Prime day sale had it for $50

  • 7 THOUSAND Subscribers!

    Jump

  • I just started playing DnD a year ago for the first time at 31. I’d always wanted to play, ever since I was a kid, but never had the chance. So I decided to grab my wife and a couple of my wife’s friends and DM a short one shot, just to see if we enjoyed it. I spent a lot of time watching videos and looking at the DM communities, and after a couple weeks, we played it. It was a blast, and now a year later we’ve finished our first module and are midway through our second, and I’ve loved every second of it. We have three more players, two of which have played for years, and I’m still DMing.

    If you’ve got some friends that play in person and they have an open slot, I’d 100% say go for it. Let them know you’re a total noob and just follow their lead; everyone was new at some point.

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • I ended up not ordering the cooler based on the recommendations here. I should be able to start building sometime next week. Thanks!

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • That’s awesome, I’ve got the parts coming in the mail now. Excited to start building

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • I saw that, I was considering it. I ended up picking up the 5600x today instead, as it’s cheaper than the 5600 that I’d budgeted for.

  • [Axios] Texas Democrat enters race to unseat Ted Cruz

    Jump

  • Texas state Sen. Roland Gutierrez, from San Antonio.

  • I'm being harassed by mosquitoes, how do i kill them all?

    Jump

  • I think they sell mosquito nets specifically for this too, it can catch a ton.

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • With an AM5 build, wouldn’t I need to upgrade a few of the other components as well?

    Edit: nvm opened the link and saw the build. I’ll need to spend some time considering this lol

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • I think I’m going to end up going with the 5600 after all the recommendations. Appreciate it!

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • Are those solid manufacturers as well? I saw that sapphire was recommended so just stuck with that.

  • Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

    Jump

  • My current pc is running on 8 or so years with the only upgrade being an ssd. I’ll probably run this one into the ground as well lol. That is good to know though, thanks. I’m hoping the next pc will be a little more high-end.

  • Buildapc @lemmy.world
    pm_me_your_happiness @lemmy.one

    Absolute beginner here, a little overwhelmed. Can someone take a look at this build and tell me how to improve it? Trying to keep it sub $1000

  • Dungeons and Dragons @lemmy.world
    pm_me_your_happiness @lemmy.one

    DMs, have you ever given your party a victory lap against the BBEG? How did it play out?

  • cats @lemmy.world
    pm_me_your_happiness @lemmy.one

    Rice cat

  • cats @lemmy.world
    pm_me_your_happiness @lemmy.one

    Desk cat

  • 196 @lemmy.blahaj.zone
    pm_me_your_happiness @lemmy.one

    rule