Skip Navigation

User banner

Mr.Mofu

@ Mr_Mofu @lemmy.blahaj.zone

Posts
106
Comments
135
Joined
3 yr. ago

Fluffy Tails Lover on a quest to find the Softest Tail that has ever existed

Please bare in mind that unless I directly say otherwise, no images I post are made by me -they usually stem from years old Phone storage

  • How can I stop Red PETG from being too Transparent on a Top Surface?

    Jump

  • So No matter what I try, It only does Infill before 1 Layer of Top Surface. No settings seem to trigger anything else. Even putting infill at 0% makes it just hollow instead of producing more Top Surface Layers...

  • Soooooo, you guys think the orange man will follow through?

    Jump

  • Lmao Nah. That Guys threats hit me as little as whenever Putin threatens nukes. Not gonna happen

  • How can I stop Red PETG from being too Transparent on a Top Surface?

    Jump

  • Hm I see, ill give it a shot thanks!

  • How can I stop Red PETG from being too Transparent on a Top Surface?

    Jump

  • The Infill is 100% for the entire Object. Yeah it is a Multifilament system swapping once between black and red PETG

  • How can I stop Red PETG from being too Transparent on a Top Surface?

    Jump

  • The Infill is at 100% for the entire Objekt

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    How can I stop Red PETG from being too Transparent on a Top Surface?

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    Which Prusa has the Least VFA/Ringing/Ghosting Artifacts?

  • Whats a Good App to Hide Certain apps Behind a Password or Pattern Unlock?

    Jump

  • Android 16, One UI 8

  • Whats a Good App to Hide Certain apps Behind a Password or Pattern Unlock?

    Jump

  • Most I can find the there is the before mentioned Private Folder?

  • Android @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    Whats a Good App to Hide Certain apps Behind a Password or Pattern Unlock?

  • Buy European @feddit.uk
    Mr.Mofu @lemmy.blahaj.zone

    Whats A Good European Car Speaker Manufacturer?

  • Anyone other young people into Retro Computing?

    Jump

  • I was born After 2000s and yeah I love Retro Computing! Before I really got into the Looks and aesthetics of Retro Computers Like the Commodore PET, so when I saw one in an Auction for surprisingly Little Money I took a Bid on it, thinking I'd get outbid anyway... I didn't!

    Once I had this Massive Historic Machine in front of me, my Passion was set in stone. I got into History Videos and Technical Analysis of Old Hardware and got a Small Collection together!

    Due to Budgetary issues as of recent I've had to Cool on this Hobby of mine tho. Hope I get to expand my Collection with an Amiga or any of the Atari Systems later this year hopefully!

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    Regaining Sanded PETG Colour: Heat Didn't Quite Work for Dark Parts...

  • Digital Art @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    Whats a Good and Up to Date Image Poisoning/Protection Tool to keep Art Safe?

  • Are there any Ways of Downloading a Twitter/X Account? [Posts, DMs, Interactions]

    Jump

  • Got my Twitter Archive Now! It does seem to have it all pretty much... i wonder if there is a Front end Kinda thing to view em trough? I once backed up my whole Discord Profile, and it came with an Extra app that let me view my stuff in a Discord esc environment

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • I mean it wasn't boiling which I thought was the issue. The setup I got rn is a Very Solid glass Jar that was fully Sealed and heated to around 50°C on my Printer bed. Left my Prints in there for between 30 Minutes to a Whole day, and while it was a lot shinier afterwards, no changes in the lines or or layers where to be seen.

    Safety wise I got a Gas Mask, Fitting Clothes and some other Saftey stuff around

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • Hmmm my Heatbed goes to 100°c and I do have a Smooth surface plate around... what do you think?

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • I have tried using a Regular Soldering Iron to smooth out the surfaces, to not a lotta luck tho. At what temps can the Plastic Colouring be regained? Because I think I had mine set too high

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • The Shiny look it something I try to somewhat avoid im afraid

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • The main thing I'm wondering right now, is the MEK supposed to Boil? I feel like it should be, but at that point im also working with e Pressurised Vessel with very much Dangerous chemicals... thought's?

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • The Prints I'm working on at the moment are rather small, I think a Torch or Heatgun could also melt other spots that aren't supposed to be melted because of needed Surface Patterns... I wonder if there is something a bit more Controlled?

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • I have been using more Coarse ones thus far yes... I do wanna achieve the same colour as the original Plastic tho

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • I see, thats quite interessting... I do wonder since my Main Concern are Flat Top Surfaces, if putting the rough Print surface on a Heated Surface of Sorts would do something simular? Thinking like a Heated Pan or Metal Sheet?

  • How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

    Jump

  • Soooo I did actually try Vapor Smoothing with MEK Before! Infact I still got a Litre of that Stuff Around now, but even after leaving the print in there for Days at 50°C the Results where... honestly no big Changes at all...

    I do suspect there is an Error in my Methodology... but turns out there isnt a lot of Info out there on Vapor Smoothing with MEK... Have you used MEK for Vapor Smoothing before?

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    How do you Sand Coloured PETG without loosing the Colour? Are there any Methods to Preserve or Regain the Colour?

  • Are there any Ways of Downloading a Twitter/X Account? [Posts, DMs, Interactions]

    Jump

  • From what I've Read, it doesnt do Posts or DMs right? I did request it for Completion sake, but it might take a bit to get here

  • datahoarder @lemmy.ml
    Mr.Mofu @lemmy.blahaj.zone
    Posts DMs Interactions

    Are there any Ways of Downloading a Twitter/X Account?

  • Anime and Pics @reddthat.com
    Mr.Mofu @lemmy.blahaj.zone

    New Commission! Its Lyra Kicking a Lucky Fella with her Paws!!!

  • Anime and Pics @reddthat.com
    Mr.Mofu @lemmy.blahaj.zone

    I've Commissioned an Artist that I've been following for 7 Years Yesterday... 2 Hours Later, he was Done!!!

  • Anime and Pics @reddthat.com
    Mr.Mofu @lemmy.blahaj.zone

    The Witch From The Cosmos ✨️

  • Personal Finance @lemmy.ml
    Mr.Mofu @lemmy.blahaj.zone

    Thoughts on Trade Republic? Is it Trust worthy as a Main Savings/Payment Account?

  • Buy European @feddit.uk
    Mr.Mofu @lemmy.blahaj.zone

    Whats a European made Framework Alternative Laptop for around 800€-1.000€?

  • Linux Mint @lemmy.ml
    Mr.Mofu @lemmy.blahaj.zone

    How well does Linux Mint work with the Framework 12?

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone
    Bambu P1S

    I'm Unable to get any PETG HF Filament to Stick on the Bed after having Switched from a 0.4mm to a 0.2mm Nozzle

  • Minecraft @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    looking for a A Simple Survival Server with Claim mechanics!

  • 3DPrinting @lemmy.world
    Mr.Mofu @lemmy.blahaj.zone

    How Transparent is Clear Resin in actual use? (Solved!)

  • retrocomputing @lemmy.sdf.org
    Mr.Mofu @lemmy.blahaj.zone

    Whats a good Resource on Learning 6502 Assembly, for someone who has little to no experience Programming?

  • BuyFromEU @feddit.org
    Mr.Mofu @lemmy.blahaj.zone

    Whats a good European Made, Quality and actually Long Lasting Flip Case for an S22+ Ultra?