RouterOS v7.14.0 Stable Released

Release 7.14 2024-02-29

What's new in 7.14 (2024-Feb-29 09:10):

!) rose-storage - moved SMB service to the RouterOS bundle;!) smb - removed legacy SMB service (replaced with newer and faster ROSE SMB service, compatible with SMB 2.1, SMB 3.0 and SMB 3.1.1);*) 6to4 - make "ipsec-secret" sensitive parameter;*) api - improved REST API stability when processing invalid requests;*) api - properly return SNMP OIDs when requested;*) arm - improved system stability when using microSD on RB1100Dx4;*) arp - added ARP status;*) bgp - allow to leak routes between local VRFs;*) bridge - added MLAG support for MSTP bridges;*) bridge - avoid per-VLAN host flushing on HW offloaded bridge;*) bridge - fixed auto "path-cost" for bonding interfaces (introduced in v7.13);*) bridge - fixed MLAG connection after peer-link flap (introduced in v7.13);*) bridge - fixed packet forwarding after changing HW offloaded bridge interface settings in certain cases (introduced in v7.13);*) bridge - improved bridge VLAN configuration validation;*) bridge - improved configuration speed on large VLAN setups;*) bridge - improved protocol-mode MSTP functionality;*) bridge - improved protocol-mode STP and RSTP functionality;*) bridge - make "point-to-point=yes" default value for non-wireless bridge ports;*) bridge - removed "mst-config-digest" from MSTI menu;*) bridge - try to set wireless bridge ports as edge ports automatically;*) bth - added simple "Back To Home Users" manager under IP/Cloud menu;*) calea - improved system stability when adding bridge rule without "calea" package installed;*) certificate - improved certificate validation performance;*) console - added ":tolf" and ":tocrlf" commands for converting line break to/from LF or CRLF;*) console - added "show-at-cli-login" option to display a note before telnet login;*) console - added missing "where" clause for "/ipv6/firewall/filter" table print command;*) console - do not accept negative or too large values for ":delay" command;*) console - do not allow to use out-of-range values for time type fields;*) console - fix configuration export when user does not have a "sniff" policy;*) console - fixed delayed output from ":grep" command in certain cases;*) console - fixed incorrect behavior of ":onerror" command in certain cases;*) console - hint on reset command help that ".rsc file" is required for "run-after-reset" parameter;*) console - improved editor functionality in full screen mode;*) console - improved stability when using autocomplete with "export";*) console - increased maximum file content length that can be managed through command line to 60 KB;*) console - updated copyright notice;*) container - improved VETH interface management responsiveness and reliability;*) container - restrict "/container/shell" menu for users without "write" permissions;*) defconf - added log about configuration reset due to pressed reset button;*) defconf - fixed Audience scanning-for-wps-ap timeout;*) defconf - fixed configuration script on KNOT devices if "ppp-out" interface is removed;*) defconf - fixed firewall rule for IPv6 UDP traceroute;*) defconf - fixed wifi configuration if interface MAC address is changed;*) defconf - improved wifi interface detection after upgrade;*) defconf - increased LTE interface wait time;*) defconf - updated health settings on configuration revert;*) defconf - use "fq_codel" queue as default interface queue for wired ports on LTE devices;*) dhcpv6-client - install dynamic IPv6 blackhole routes in corresponding routing-table;*) dhcpv6-client - updated error logging when multiple prefixes received on renew;*) disk - added exFAT and NTFS mount/read/write support;*) disk - added global disk "settings" menu;*) disk - fixed changing settings on some GPT formatted disks;*) disk - properly unmount disk when it is disconnected;*) dns - do not add new entries to cache if "cache-size" is reached;*) dns - fixed domain name lookup resolving for internal services;*) ethernet - fixed issue with default interface names for CRS310-8G+2S+ in rare cases;*) ethernet - improved cable-test reliability for hAP ax3 PoE out port;*) ethernet - resolved minor memory leak while processing packets;*) fetch - added "head" option for "http-method";*) fetch - added "patch" option for "http-method";*) fetch - allow specifying link-local address in FTP mode;*) fetch - allow to use certificate and check-certificate parameters only in HTTPS mode;*) fetch - do not require "content-length" for HTTP (introduced in v7.13);*) fetch - fixed DNS resolving when domain has only AAAA entries (introduced in v7.13);*) fetch - fixed fetch execution when unexpected data is received in HTTP payload;*) fetch - fixed fetch when using "src-path" with HTTP/HTTPS modes (introduced in v7.13);*) fetch - fixed fetch when using "src-path" with SFTP mode (introduced in v7.13);*) fetch - fixed incorrect "src-path" error message when "upload=yes";*) fetch - fixed IPv4 address logging (introduced in v7.13);*) fetch - improved fetch stability in SFTP mode;*) fetch - improved file download stability with HTTP/HTTPS modes;*) fetch - less verbose logging;*) fetch - print all "Set-Cookies" headers in response;*) fetch - treat any 2xx HTTP return code as success (introduced in v7.13);*) filesystem - improved filesystem integrity for several RB3011 units with automatic firmware upgrade;*) firewall - added "creation-time" parameter for IPv6 address list entries;*) firewall - fixed underlying CAPsMAN tunnel reusing packet marks of encapsulated packets;*) firewall - fixed underlying VXLAN/EoIP tunnel reusing packet marks of encapsulated packets;*) firewall - increased default "udp-timeout" value from 10s to 30s;*) health - added limited manual control over fans for CCR1016r2, CCR1036r2 devices;*) health - changed default "fan-min-speed-percent" from 0% to 12%;*) health - improved fan control on CRS3xx and CCR1016-12S-1S+r2;*) health - show voltage when powering KNOT R through Micro-USB;*) health - updated health properties for CCR1016r2, CCR1036r2 devices;*) iot - added bluetooth whitelist wildcard asterisk support;*) iot - added LoRa CUPs protocol support;*) iot - fixed modbus partial frame reception issue;*) iot - improved LoRa LNS;*) iot - improved modbus Tx/Rx switching behaviour;*) iot - improvements to GPIO behavior on boot;*) iot - improvements to LoRa CUPS;*) iot - removed bluetooth whitelist maximum entry limit of 8;*) ipv6 - made "valid" and "lifetime" parameters dynamic for SLAAC IPv6 addresses;*) isis - show passive interface active levels;*) l3hw - fixed IPv6 host offloading in certain cases;*) l3hw - fixed neighbor offloading after link flap;*) l3hw - preserve offloading for VLANs when bridge ports are down;*) leds - added "dark-mode" functionality for hAP ax3 and Chateau ax series devices;*) leds - do not show LTE connection state/mode using RGB power LED from configless LTE modems;*) leds - fixed "type=on" LED behaviour after reboot;*) leds - fixed default LTE LED configuration for wAPR-2nD;*) leds - fixed modem LED indication for SXT LTE 3-7;*) leds - fixed wireless type of LED triggers for routers using WiFi package;*) lte - added "at-chat" support for Sierra Wireless EM9293 5G modem;*) lte - added AT channel support for Quectel EM120K-GL modem;*) lte - added redial timer when the MBIM modem fails to register or does not receive APN activation notification;*) lte - don't duplicate primary band in 5G SA mode for chateau 5G;*) lte - fixed "use-peer-dns" setting for EC200A modem;*) lte - fixed an issue for EC200A modem that IPv6 address could be added as IPv4 address;*) lte - fixed APN authentication for FG621-EA modem;*) lte - fixed MBIM interface enabling for Quectel EC25 modem (introduced in v7.13);*) lte - fixed Simcom modem support in 0x9000; 0x9002, 0x9002; 0x901a and 0x901b USB compositions;*) lte - fixed Simcom modem support in 0x9001 USB composition;*) lte - fixed support for config-less modem detection (introduced in v7.13);*) lte - fixed USB mode switch and initialization race condition for configless USB modems;*) lte - improved FG621-EA modem firmware upgrade;*) lte - improved modem recovery after failed IPv4 configuration;*) lte - improved support for "ACER" and "MSFT" branded EM12-G modems;*) lte - optimized "at-chat" response reading;*) lte - refactored AT command control for AT modems;*) modem - fixed SMS removal (introduced in v7.13);*) modem - improved stability when performing modem FOTA upgrade;*) mpls - fixed VPN fragmentation when forwarding IP traffic;*) netinstall-cli - check package and device architecture before formatting;*) ovpn - added support for pushing routes;*) ovpn - improved "push-routes" option handling when large amount of routes is specified;*) ovpn - improved key-renegotiation process;*) ovpn - improved OVPN configuration file import process;*) ovpn - improved system stability when using HW encryption on ARM64 devices (introduced in v7.13);*) ovpn - limit the maximum length for "push-routes" up to 1400 characters;*) package - added "size" property;*) package - reduced "wireless" package size for ARM, ARM64, MIPSBE, MMIPS devices;*) package - reduced package size for SMIPS;*) poe-out - driver optimization for AF/AT controlled boards;*) poe-out - fixed "power-cycle" for CRS354-48P-4S+2Q+ device (introduced in v7.13);*) poe-out - improved 802.3at classification and measurement accuracy;*) poe-out - improved cable test for hAP ac3 and hAP ax3 devices;*) poe-out - improved PoE out reliability on routers with a single PoE out interface;*) port - fixed support for USB/serial adapters (introduced in v7.13);*) port - removed bogus serial port on RB750Gr3, RB760iGS and RBM11G devices;*) ppp - added support for "WISPr-Session-Terminate-Time" RADIUS attribute;*) ppp - log an error when IPv6 DHCP pool is exhausted;*) ptp - added "aes67" and "smpte" profiles;*) ptp - added configurable "domain" and "priority2" parameters;*) ptp - added support for Management message forwarding in BC;*) ptp - fixed "default" and "g8275.1" profiles go into "slave" instead of "uncalibrated" state;*) ptp - fixed default values for "802.1as" profile;*) ptp - fixed flags in Announce message;*) ptp - fixed potential error in packet exchange;*) ptp - make clock go into grandmaster state if slave port goes down;*) qos-hw - fixed "tx-queue7-packet" counter;*) route - fixed gateways of locally imported vpnv4 routes;*) route - improved route print "count-only" process speed;*) route - improved stability on route table lookup;*) route-filter - added option to set "isis-ext-metric";*) route-filter - fixed AS path matchers when input and output chains are used;*) routerboard - added "reset-button" support for RBwAPR-2nD device;*) sfp - added support for modules requiring single byte I2C read transactions;*) sfp - fixed corrupted Tx traffic at 10Gbps rate on CCR2004-16G-2S+ in rare cases;*) sfp - fixed corrupted Tx traffic at 10Gbps rate on RB4011 in rare cases;*) sfp - improve high-power SFP module initialization;*) sfp - improved combo-sfp handling for CRS328-4C-20S-4S+;*) sfp - improved link establishment for RB4011 devices;*) smb - added option to specify SMB service mode as "auto";*) sms - fixed SMS inbox for FG621-EA modem (introduced in v7.13);*) sms - fixed SMS sending from WinBox and WebFig (introduced in v7.13);*) sms - improved system stability when working with SMS;*) sms - increased SMS read timeout;*) snmp - added "bgpLocalAs" and "bgpIdentifier" OID reporting;*) snmp - fixed "bgpPeerFsmEstablishedTime" OID reporting;*) snmp - hide "MikroTik" in LLDP MIB when branding with hide SNMP option is used;*) snmp - updated timeout log;*) ssh - improved SSH performance on ARM, MIPS, MMIPS, SMIPS and TILE devices;*) ssh - refactored SSH service internal processes;*) sstp - added support for "aes256-gcm-sha384" encryption;*) sstp - improved system stability for PPC devices;*) supout - added PTP section;*) switch - fixed Ethernet disable/enable for CRS310-8G+2S+ devices;*) switch - fixed reserved multicast receive on Atheros-8327, QCA8337 switches for R/STP bridge;*) switch - improved 100G interface stability for 98DX4310 and 98DX8525 switches;*) switch - minimise potential packet overflows on CRS354;*) system - changed build time format according to ISO standard;*) system - expose "lo" and "vrf" interfaces;*) system - fixed "cpu-frequency" for CRS3xx ARM devices;*) system - improved memory allocation for ARM64 devices;*) system - improved RAM allocation for L009UiGS-RM;*) system - improved system stability when processing packets in FastPath (introduced in v7.13);*) system - properly assign destination port for HTTP/S connections initiated by the router (introduced in v7.13);*) system - properly close HTTP/S connections initiated by the router;*) system - provide more precise "total-memory" value for ARM devices;*) system - provide more precise "total-memory" value under "System/Resources" menu for L009 and hAP ax lite routers;*) tftp - improved invalid request processing;*) timezone - updated timezone information from "tzdata2023d" release;*) tr069 - don't duplicate cellular info in "X_MIKROTIK_5G" nodes when connected in NR SA mode;*) tr069 - fixed bandwidth test;*) tr069-client - show 5G signal info in X_MIKROTIK_5G nodes only for 5G NSA bands;*) traffic-flow - use 64bit counters for v9 and IPFIX flows;*) traffic-generator - improved system stability when receiving bogus traffic;*) usb - show "Supermicro CDC" adapter as Ethernet interface;*) vlan - fixed non-running VLAN interface after failed MTU change;*) vrf - prevent VRF interface name collision with interface lists;*) vxlan - fixed underlying tunnel reusing routing marks of encapsulated packets;*) webfig - fixed routing table filter under "IP/Routes" menu;*) webfig - fixed setting the user's password;*) webfig - fixed showing WireGuard peers;*) webfig - improved stability when adding new entries under "IP/Routes" menu;*) wifi - added "station-pseudobridge" interface mode;*) wifi - fixed issue with setting country profile (introduced in v7.13.1);*) wifi - improved handling of CAP connections in dual CAPsMAN scenario;*) wifi - increased value for SAE retransmit period to 3s to improve WPA3 compatibility with IoT client devices;*) wifi - use "Latvia" as the default value for "country" property;*) wifi - use correct CAP identity for interface name provisioning after it has been changed by remote-cap/set-identity;*) wifi-qcom - enable display of regulatory information on L11,L22 devices;*) wifi-qcom - fixed new connections, when maximum supported number of MAC addresses behind connected station-bridges is reached;*) wifi-qcom - improve system stability for L11, L22 devices;*) wifi-qcom - improved memory allocating process;*) wifi-qcom - improved regulatory compliance for L11, L22 devices;*) wifi-qcom - improved system stability when using FastPath (introduced in v7.13);*) winbox - added "accept-protocol-version" parameter to the L2TP server settings;*) winbox - added "mode-button" and "switch" menus for L41G-2axD&FG621-EA;*) winbox - added "Name" parameter under "Tools/Netwatch" menu;*) winbox - added "page-refresh" setting to the Graphing settings;*) winbox - added "Port Cost Mode" setting under "Bridge" menu;*) winbox - added "VRF" parameter under "Tools/Ping" menu;*) winbox - added "x25519" argument for "DH Group" parameter under "IP/IPsec/Profiles" menu;*) winbox - added missing "Protocol" arguments under "IPv6/Firewall" menu;*) winbox - added missing monitoring properties under "WireGuard/Peers" menu;*) winbox - added Preboot Etherboot settings to the System/RouterBOARD/Settings menu;*) winbox - do not show USB settings for CRS devices that does not need it;*) winbox - fixed "Bridge Cost" range under "Interfaces/VPLS" menu;*) winbox - fixed "Password" button under "Quick Set" menu;*) winbox - improved connection speed and reliability;*) winbox - improved route table automatic refresh process for static routes;*) winbox - improved status values under "System/PTP" menu;*) winbox - improved system stability with large packets;*) winbox - include "te-tunnel" parameter in VPLS interface monitor;*) winbox - properly validate "passthrough-subnet-size" in the LTE APN settings;*) winbox - remove "Root Bridge ID" property under "Bridge/MSTIs" menu;*) winbox - removed "sfp all" option from combo port settings;*) winbox - renamed "Wireless Table" menu to "Wifi";*) winbox - show "routing-table" column under IP/Route menu by default;*) winbox - show all columns under "Routing/PIM SM/Static RP" menu by default;*) wireguard - do not allow to use multiple WireGuard interfaces on the same "listen-port";*) wireguard - optimised and improved WireGuard service logging;*) x86 - fixed VLAN tagged packet transmit for igb (introduced in v7.12);